Ten years ago, when I first rode a mountain bike with 29-inch wheels, I hated it. A lot of cyclists were hyping the performance benefits of the larger wheel size. But I’m four foot eleven. The size-small 29er that I tested felt as agile as an aircraft carrierand just as effortful to get moving. Over the next several years, I had scarce opportunities to try competing models, becausefew 29ers were even made in my size. The prevailing advice was that short cyclists shouldn’t ride 29ers, and I believed it.
Any cyclist who’s under five foot fivehas probably heard that 29ers aren’t ideal for them. That’s because, for a long time, it was true. When 29-inch wheelsbegan appearing on mountain bikes about 15 years ago, companies attempted to shrink the big-wheeled formula into frame sizes that were small enough to fit sub-five-foot-fiveriders (many of whom were women—the ). But the results often meant that riders’ toes hit the front tire when turning, called toe overlap. Another complaint was the tall stand-over height, which compromised bike handling.The bigger wheels also lengthened bikes’ overall wheelbase, and some designers exacerbated that length by slackening the headtube to accommodate riders’ toes.” That made 29ers “feel like a bus to smaller riders,”explains Brock Webster, who owns Orange Peel Bicycle Service in Steamboat Springs, Colorado. Consequently,many bike companies simply didn’t make 29ers in a smallor extra small, because they couldn’t preserve the handling characteristics without toe overlap at thoseframe sizes. Shorter women and teens enjoyed better performance from bikes built around 26- and 27.5-inch wheels.
More than a decade later, many cyclists still abide by that logic—although now it’s not always accurate.Over the years, bike manufacturers have evolved the 29er formula. Some of those innovations have made it possible to extend the fit and performance to accommodate four-foot-ten riders. That’s good news for short cyclists, because the larger wheels of a 29er offercompelling advantages. Theycan take more work to get rolling, but they alsohold more speed, offer more traction, and smooth outrough terrain.Consequently, they’ve become the industry’s hottest commodity. “Three-quarters of all the bikes we sell now are 29ers, and that includes small frames,” says Webster. “Nowwe can sell 29ers to extra-small riders, and the bikes fit awesome and handle great.”
One key development was designers’ increasing use of carbon. “Carbon lets you make any shape you want,” says Dave Weagle, a bike and suspension designer who’s consulted with such brands as Ibis, Pivot, and Salsa. (Weagle also developed Evil’s game-changing 29er, .) It’s allowed frame builders to create swoopy top tubes with ultralow stand-over heights that can accommodate the shortest riders.
Inventive components have also given frame designers an expanded range of build options. For example, offset forks (with stanchions that sit behind the wheel’s axlerather than in-line with it) have achieved big improvements in 29er handling, says Webster.
Plus, innovative suspension systems have created new ways for the rear wheel to absorb hits from rocks and roots—and ultimately, have made smaller frames more viable. “Ten years ago, the rear wheel on a full-suspension bike moved in an arc, up toward your bike, so the bigger 29-inch wheels were more likely to hit your frame or your butt,” explains Webster. Nowsuspension designs such as Weagle’s and Yeti’s Switch Infinityallowthe rear wheel to follow a more sophisticated path that can include backward travel. These suspension systems letframe designerstuck the rear wheel underneath the rider, closer to the pedal cranks, which shortens the bikes’ chainstays and makes the bike feel nimbler and less lumbering—all while avoiding tire-frame collisions. Such advanced geometries are a boon for riders of all sizes, but in particular, they have opened the door to small-size, high-performance 29ers.
Of course, not every 29er that’s currently available is optimized for short people. Some bikes simply don’t come in appropriate sizes (Evil’s The Following in a small only fits riders down to five foot three). Others promise to fit short riders, but those on the littlest tip of the size spectrum still aren’t guaranteed a good fit.“I can’t get the right fit on a lot of other 29ers that are in a small size and are said to fit riders of my stature,” says, a professional racer. Sometimesvariations in riders’ torso and inseam lengths are to blame.
But the bigger reason that companies remain reluctant to cater to the shortest cyclists isbecause the smallest frames don’t sell as well as larger options. “For most mountain-bike companies, the smallest frames would constituteless than 10 percentof total bike sales,” says Weagle.“So for a smaller brand, trying to make an ROI on a $50,000-pluscarbon front-triangle tool becomes challenging, and the small frame sizes typically become loss leaders.”
Still, a fewcompanies are translating the latest in 29er technology into frames that are optimized for the shortest cyclists.
Giant and its women’s brand, Liv, have an above-average track record for fitting small riders, says Webster. This may have something to do with the fact that the brands consult data on rider physiques that span the entire globe, including demographics that skew shorter than the U.S. The aluminum 2020 Liv Pique 29 and the carbon Pique Advanced Pro 29 represent excellent options for the under-five-foot-fourcrowd. Both come in an extra small, which fits four-foot-ten to five-foot-four riders, and a small, which fits five-foot-twoto five-foot-seven riders. I canconfirmthat the extra smallfelt comfortable and performed well at the smallest end of that fit spectrum. To achieverace-likeacceleration, Liv’s advanced engineer, Sophia Shih, took a surgical approach to framestiffness in the size extra small, boosting it specifically in the bottom bracket linkagerather than across the bike as a whole, which improved the bike’s pedaling efficiency without making the framefeel overbuiltfor a small-framed rider.
Ibis made sure that its 120-millimeter Ripley, which debuted in 2013, fit cyclists down to five foot one,because that was the height of the company’s co-owner and bike designer, Roxy Lo. At that time, Ibis’s engineer suggested that they offer the Ripley in all sizes except small. “I was pretty upset,” says Lo, who declared, “I don’t want to design a bike that I can’t ride.” The bike they wound up with boasted three key advances. First: designers packagedthe suspension linkage into miniature eccentrics that could be tucked into the seat tube and out of the way of the tire, which enabled them to make much shorter chainstays than other bikes at the time. Second: a slack headtube solved toe-overlap problems. (Ibis consequently used a longer offset fork to reduce the steering effort). Third: new forks that featured a shorter steerer-tube taper allowed for a lower headtube and handlebars.
Initially, small Ripleys weren’t big sellers. But the company has since seen surging interest in small-size 29ers.“People were used to hearing that 29ers aren’t for short people,” says Lo. But Ibis has remained dedicated—and not just on short-travel models. The 27.8-inchstand-over height on Ibis’s Ripmo AF, a 29er with 147 millimetersof rear travel and 160 millimetersup front, lets five-footriders get rowdy.
At that time, Ibis’s engineer suggested that they offer the Ripley in all sizes except small. “I was pretty upset,” says Lo, who declared, “I don’t want to design a bike that I can’t ride.”
Meanwhile, at Pivot, owner and designer Chris Cocalis has long prioritized size-specific fits and layups that are optimized for the intended riders’ heights and weights. Even so, Cocalis says, “Until recently, we were pretty vehemently against trying to put a four-foot-elevento five-foot-threerider on 29-inch wheels.” But people were asking for it. One of those people was Chloe Woodruff, a Pivot-sponsored racer who is five-two. She watched her competition hitting PRs on 29ers and worried that she’d be left behind with the Pivot Mach 4 and its 27.5-inchwheels.
Creating a 29er with the same (or lower) stand-over height as the Mach 4 proved to be challenging. Switching the shock to a vertical orientation from a horizonal one made all the difference. The 29er , which hit the market last fall, is three-quarters of a pound lighter in an extra small than the old 27.5-inch version, with a lower stand-over height (24.15 inchesfor the extra-small29er, compared with26.06 inchesfor the extra-small27.5). And Woodruff is faster on it. “I think it’s just more efficient, especially in situations when you’re maintaining a steady pace,” she says. “It’s more forgiving on rougher terrain, and it’s more stable at higher speeds.”
For all those reasons,Webster, of Steamboat’s Orange Peel,now recommends that beginners and tentative riders consider 29ers first. “There’s less of a need to pick and choose your line,” he explains. The bike rolls over things, so you need less skill.He’s also heard from experienced cyclists whoachieved technical breakthroughs once they switched to 29ers. Choosing between that wheel size and the 27.5, which often has a moreplayful feel, is a personal preference, Webster says.
Short riders whodo choose 29ers would also benefit from buyingthe lightest wheels they can afford, to help counteract the slower acceleration of big wheels. “That’s always good advice,” Webster says, but it’s particularly valuable when you pair bigger, heavier wheels with super-short legs. Shorter crankarms can also improve bike fit. Woodruff cured her persistent lower-back pain by switching from 170-millimeter cranks to 165-millimeter ones. “Cyclists and people that sit at desks for work don’t generally have great hip mobility, so their bodies have a harder time making those bigger circles with a longer crankarm,” she explains.
Short cyclists also tend to weigh less, which prompts an additional list of settings that might differ from the ones preferred by tall cyclists. Ibis has offeredthe “Roxy tune,” adjusting the rear shockso that smallerriders can enjoy optimal suspension engineering (now, that’s achieved through the company’s newest Traction Tune and Light Tune options). Buyers of builds with Fox components can also ship their parts to the suspension maker for the same tuning.Some lightweight riders benefit from pulling the volume spacers out of the forkand can also get away with ultralow tire pressures (which improve grip and comfort).
But the devil’s in the details. When shopping for a bike, says Lo, anything that fits is likely to be brilliant—because in the bike world, “everything is golden right now,”she says.“You really can’t get a bad bike.” Finally, that’s even true for short cyclists.
This story has been updated.